New Source For Clamps

BRS has received requests for installation tools, especially seam clamps, in the past and we did not have a vendor to provide such tools.

BRS approached Robert Lytle with Quality Roof Seamers (QRS) to see if he was capable of manufacturing and willing to produce seam and module clamps. Robert realized this was a great opportunity to service his customers with helpful tools especially to aid in the seaming process. The module clamps are beneficial while keeping and getting the roof on module as well as keeping the panel from flaring. BRS has also found using seam clamps at the endlap will help keep the endlap nested together while screwing the panels to the backup plates and assist the tape sealant to flow nicely at the seam.

QRS has these 3 clamps in stock, the TS-324 Module Correction Clamp, the PanelCraft Module Clamp and Standard Seam Clamp. These clamps can be purchased or rented and accompany the rented seamer. QRS is the only approved seamer supplier for the BRS roof systems at this time. We are confident in the ability and quality of QRS’s products. We are pleased that QRS was able to meet this need and recommend the use of these clamps on all BRS roofs.

Seam Clamp
This universal clamp can be used on most standing seam roof panels. The clamp is used to pull the male and and female legs together. It is also beneficial when used at the endlap to assist the tape sealant to flow nicely at the seam.

TS Module Correction Clamp
This specific clamp is to be used on a 3” trapezoidal roof panel. The clamp can be used during installation
and is designed to be used as a corrective tool to get the roof system back on module.

PC Module Clamp
This specific clamp is to be used on a 2” architectural roof panel. The clamp pulls the two pans together to
assist in keeping or getting the roof on module as well as keeping the panel from flaring.

Contact QRS today to purchase your clamps
Quality Roof Seamers
8265 Hwy 178
Olive Branch, MS 38654
662-895-1222

http://www.qualityroofseamers.com/