BRS to Offer Module Clamp Kits

Alignment Tool Essential

ModuleClmp.jpg

A short number of years ago, Building Research Systems (BRS) successfully developed a patented hand tool kit called the Module Clamp Kit which incorporates a Module Clamp, an Alignment bar and three (3) aluminum T-bar Spacers that is designed to hold panel modularity during panel installation which many erectors have utilized. BRS developed and patented this effective installation tool kit for all license holders along with the installers that can really utilize them. Recently, it was brought to our attention by several license holders along with many of their long-standing erectors, that these innovative Module Clamp Kits were no longer available for purchase due to exhausted supplies related to difficulties in part manufacturing  by our strategic partners. It was also brought to our attention, even the numbers of rental units were dwindling in availability for usage within the erection community due to their high field use and demand. These reports have prompted BRS to move forward with the commissioning of static tooling fixtures to manufacture these effective installer Module Clamp Kits. The new production jig will allow the production of unmatched quality consistent kits and parts while assuring the tools will be readily available for immediate purchase.
 
BRS is pleased to announce these patented innovative Module Clamp Kits will be manufactured, stocked and sold at our location in Edmond, Oklahoma for immediate purchase. We will have a limited supply on hand at any given time for immediate purchase and shipment. The kits are reasonably priced and available for purchase from BRS plus shipping costs, appropriate taxes (if applicable) and will be shipped UPS, LTL or Fed-Ex depending the buyer’s instructions.

All kit orders will be shipped within forty-eight (48) business hours after receipt of order, payment and shipping directives. We are very excited to become the purchase location for this patented Module Clamp alignment tool kit for the TS-324™ panel roof system. Please  contact BRS personnel via telephone at 405-607-8877 or email therren@brsusa.com or crodden@brsusa.com  to purchase an innovative panel alignment tool kit. 

For Module Clamp Kit rental options please contact Quality Roof Seamers (QRS) – Olive Branch, MS  at 662- 895-1222 or visit their website www.qualityroofseamers.com for rental rates and options. The Module Clamp Kit rental is only a small part of the QRS rental fleet options and QRS is the only compliant BRS panel seamer rental company.

Panels installed out of module without kit utilization become increasingly difficult to seam because of elements that are not properly aligned. The Module Clamp Kit is ideally suited to pull these seam portions of the corrugation into proper alignment ahead of the seamer. This kit works well on roofs that have numerous panel laps, ultra-long runs, thick blanket insulation systems using extended standoff clips or ones that requires extra assistance in holding panel modularity during installation. Click here for details on the Module Clamp Kit. BRS recommends the use of the tool kits on any TS-324 roof shipment that may require this effective patented tool kit for installation modularity assurance. 

Some TS-324 panel manufacturers have elected to send 1-2  Module Clamp Kits to assist in successful in-place outcomes for roof systems that have ultra-long runs, extended stand-off clips or projects with multiple panel laps. These tool kit costs were figured into the initial project estimate(s) to assist in quality assurance when the kits are properly utilized during installation.
 
SPECIAL NOTE REMINDER: The current slotted RP-038, RP-138 rake, and the EP-038, EP-138 eave plates will be retired as of December 31, 2020.  Please visit our website at: www.brsusa.com  Licensed Roof Systems products to examine the industry’s benchmark edge/corner zone patented High Capacity Rake plates with its’ up to 7” of travel. These parts are third party tested to be up to 4X stronger than current industry rake/eave plate offerings. BRS recommends all licensees to promptly begin to integrate the high capacity rake plate into their standard roof system detail.